Grout Colorant
Grout Colorant Key Features:
- Durable epoxy formula
- Safe, easy to use water based, low VOC formula
- Maximum stain resistance
- Now with built in Microban® – Cured Sealant is Mould & Mildew Resistant
- Lasts up to 15 years
For use on
Sanded, unsanded and epoxy grout joints. Effective for interior and exterior applications. Suitable for new or existing groutGrout Colorant is an easy-to-use waterborne epoxy that recolours, seals and rejuvenates existing grout joints. Formulated to provide maximum stain protection. Change the appearance and colour of your faded, stained or patchy grout with 20 colours to choose from. Also simplifies ongoing grout cleaning.
Limitations
- Grout Colorant is not recommended for use underwater in pools, ponds, or on areas subject to hydrostatic pressure
- Do not use solvent-based cleaners on recolored grout joints
- Previously applied sealers, with the exception of Aqua Mix® Penetrating Sealer, Aqua Mix® Grout Sealer, Aqua Mix® Pro-Solv, Aqua Mix® Ultra-Solv® or Aqua Mix® Sealer’s Choice® Gold, must be removed to provide a bondable surface. Aqua Mix® Sealer & Coating Remover is recommended for this procedure
- Porous tile may require sealing to ensure colorant is not absorbed into the tile
General Surface Prep
Test a small area according to application instructions, with a minimum 1-hour cure time to determine desired results. The Grout must be dry prior to applying Grout Colorant – the following document explains in detail the definition of the term “dry” as it relates to Colorant application. READ MOREApplication Method
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Read entire label before using. SHAKE WELL before using. For new installations, Grout Colorant can be applied a minimum of 48 hours after grouting depending on jobsite conditions and ambient temperature. Grout joints must be clean, dry and free of existing sealers or coatings.Product Data Sheets
Cleaning of equipment
Clean tools with water and soap before material driesPrepare existing grout joints:
- MOST TILE & STONE: Use Aqua Mix® Cement Grout Haze Remover or Aqua Mix® Phosphoric Acid Substitute.
- ACID-SENSITIVE STONE OR SINGLE COMPONENT GROUT JOINTS: Use Aqua Mix® HeavyDuty Tile & Grout Cleaner, Aqua Mix® Grout Deep Clean or Aqua Mix® Stone Deep Clean.
- EPOXY OR URETHANE GROUT JOINTS: Use Aqua Mix® Sealer & Coating Remover.
Drying Time:
- Ready for surface traffic in 2 hours.
- Keep area dry for at least 24 hours.
- Avoid direct scrubbing on grout joints for 20 days to allow a full cure.
Grout Colorant Charts
Grout Colorant Colour Chart DAVCO Colour Comparison ChartHow to Guide:
Grout RecolouringProduct Maintenance:
Maintenance of Grout JointsVOC Content
Maximum VOCs: Less than 60 grams per litreHow To Videos
Product Warranty
Require Technical Assistance?
Please contact us at 1300 AQUA MIX or info@aquamix.com.au